1·Power take - off, squared shaft drive. two stud flange without oil seal gasket.
动力启动方轴传动装置。销法兰。无油密封垫圈。
2·ANSI flange sealing principle is extremely simple: the two bolts each other extrusion flange sealing surface and form a seal gasket.
ANSI法兰的密封原理极其简单：螺栓的两个密封面相互挤压法兰垫片并形成密封。
3·Since 1954, Press seal Gasket has been a leader in the design and manufacture of sealing products for underground collection systems worldwide.
自从1954年，Press Seal Gasket已经成为世界性的设计与生产地下收集系统密封产品的领军者。
4·Repair Kit Contains: 1-Flex Seal Gasket Seat, 1-Hinge Post, 2-Flapper Plates, 2-Flapper Covers, 1-Post Strip, 2-Seat Post O-Rings &Plastic Assembly Screws.
维修组件饱含：1件-柔性密封衬垫阀座，1件-铰柱，2件-阀瓣板，2件-阀瓣盖，1件-柱带，2件-阀座柱O形环和塑料总成螺丝。
5·Seal gaskets are closed in the support points of plates resist high press fluid impact and prevent leak out of fluids. Twice gelatinize technology make gasket firm connected.
处于板片有力支撑点包围中的密封垫片，能承受较大的流体冲击，不会泄漏，两次涂胶工艺保证了密封垫片牢固粘接。
6·Generally, the cylinder and the cylinder head bolt together with a thin gasket pressed between them to ensure a good seal.
一般来说，气缸和气缸盖用螺栓紧固在一起，气缸与气缸盖之间用一薄垫圈确保密封良好。
7·O seal: usually the dismantled o seal should be changed totally, but the gasket, etc without breakage also can be reused.
形密封：一般经过拆卸的O形密封应全部更换，对其它密封垫片等，只要没有破损，也可以复用。
8·Mechanical seal: seal face, gasket and shaft seal, etc parts must be undamaged, otherwise will result in over leakage, sure to change parts with wear and tear or damage.
机械密封：密封面、密封垫及轴封等元件必须完好，否则将导致过度泄漏，对有磨损或损伤的元件必须更换。
9·When installing a pinch valve to a rubber, PVC, or any "slick" mating flange, we recommend that you install a metal serrated gasket between the two flanges to assist in the seal.
在安装夹管阀时，如果采用橡胶、PVC或任何“光滑的”配套法兰，则我们建议在两个法兰之间加装一个金属锯齿垫圈以增强密封效果。
10·This would include in-line instrumentation, flow meters, regulating valves ultraviolet lights, pumps, pump seals, filter membranes, gasket and seal materials, and other specialized in-line devices.
该项包括在线仪器、流量计、调节阀、紫外光、泵、泵的密封件、过滤膜、垫圈和密封材料以及其他特殊的在线设备。